View Full Version : [Question(s)] ARTiGO with Pico ITX Mainboard

03-10-2008, 08:38 PM
Is anyone familiar with this product. I bought it and put it together, but there is no adapter to add a CD-ROM in order to load an OS. I was going to take it apart and connect a dual drive IDE cable, load the OS, then reassemble. I am concerned that it might overload the board. They also provide a PS/2 wire, but don't show where to connect it. I was going to try a USB first and see if it works. Any suggestions are greatly appreciated.

03-10-2008, 08:40 PM
You can plug in a USB CD-ROM drive, and install from that. I did that with mine, no troubles... (I actually used a USB DVD-Writer)

- Jon

03-10-2008, 09:25 PM
I didn't realize it would recognize a usb drive before the OS was installed. Thanks.

robot maker
06-30-2008, 11:40 PM
i also did the same with 2 of them i bought for my robots,i used a cd/rewritable usb
artigo is great,no need to make a frame to hold the board and power supply,on keyboard i used a usb to dual ps2 adapter,pico board is the best thing ever for small robots