PDA

View Full Version : Mech Warfare 2010 Roll-Call



lnxfergy
08-25-2009, 01:37 PM
Ladies and Gentleman,

This thread is our official roll-call. If you are working on a mech, please post to this thread, telling us: your mech's name, status of how far along you are building, and a link to any further information if you have it (like your mech's thread or website). Please, only post here if you have a mech in progress, thanks!

ROLL CALL: (this will be updated as new mechs are started/found):

Airsoft League
http://forums.trossenrobotics.com/showthread.php?t=3757 Issy (http://forums.trossenrobotics.com/showthread.php?t=3757) by lnxfergy, Bioloid/arbotiX-based quad. *
Giger (http://forums.trossenrobotics.com/showthread.php?t=3299) by Tyberius, RX-64/28 biped.
Bheka (http://forums.trossenrobotics.com/showthread.php?t=2162&highlight=bheka) by gdubb2, A quad made out of a Robonova. *
Squidword (http://forums.trossenrobotics.com/showthread.php?t=3100) by Darkback2, MG645 based PC-bot *
Clyde (http://forums.trossenrobotics.com/blog.php?b=196) by Mannyr7, Lynxmotion SES-based biped. *
Second Amendment (http://forums.trossenrobotics.com/showthread.php?t=3383) by Upgrayd, Quad using a mix of Custom & SES parts.
Reaver by lnxfergy, Bioloid/arbotiX-based biped.
Miss Alignment (http://forums.trossenrobotics.com/showthread.php?t=3559http://forums.trossenrobotics.com/showthread.php?t=3559) by darrellt, BRAT biped with Google Android control.
ShadowCat (http://forums.trossenrobotics.com/showthread.php?t=3695) by Rebel, SES biped.
XBrat (http://forums.trossenrobotics.com/showthread.php?t=3640) by xdream, BRAT Biped, autonomous
Gunner's Daughter by LTGunner, Brat Biped
Nomous by Lumpen5, Brat Biped, autonomous
Raven (http://www.youtube.com/societyofrobots)by SocietyOfRobots, Biped using micro servos. (Tentative)
TK421 by Jes1510, Quad using highly-leveraged servos. (Tentative)
JunkBin by Adrenalynn, Quad using a mix of SES and junk. (Tentative)

Hexapod League
Lycosa by MSK Mech Commander, based on a Phoenix.
BOo by FlowBotX, modified MSR-01 Hexapod. (Tentative)

Hardcore League
Squidword (http://forums.trossenrobotics.com/showthread.php?t=3100) by Darkback2, MG645 based PC-bot. *

An entry denoted as Tentative means the bot is under construction or done, but the builder is uncertain if they can make it to Robogames 2010.
A * denotes a bot that competed in 2009

MSK Mech Commander
08-25-2009, 06:54 PM
Mech: Lycosa
Status: Out of the box
Frame: Phoenix
Division: Hexapod

I'll get some pics of my mech up in a new thread once it's substantially assembled. Still working on the main frame in the meantime.
(fyi, lycosa: an extremely big wolf spider)

darkback2
08-25-2009, 07:04 PM
Mech: Squidword
Status: Complete
Website: This one...project page
Division: Airsoft/possibly hardcore if it happens

Mech: Maybe
Status: Figment of my imagination
Website: None
Division: Hex

DB

jes1510
08-25-2009, 07:46 PM
Mech: TK421
Status: Walking but I hate the gait. Control software not started. Need to mount guns and target plates.
Frame: Custom
Division: Airsoft

That is assuming that I get my house sold in time for the competition.

mannyr7
08-25-2009, 11:52 PM
Mech: Clyde
Frame: Custom and some Lynxmotion SES brackets.
Status: Mechanically complete and functioning. Working on a better control solution.
Website: New Trossen Blog started. http://forums.trossenrobotics.com/blog.php?b=196 (http://http//forums.trossenrobotics.com/blog.php?b=196)
Division: Airsoft definitely, possibly hardcore. Maybe even humanoid kung-fu. :rolleyes:

Upgrayd
08-29-2009, 12:22 PM
Mech Name: Second Amendment
Division: Airsoft
Status: Mechanical ~35% Control ~20%
Frame: Custom
Legs: Lynxmotion SES brackets for prototype. Plans for custom remakes
Build Log: http://forums.trossenrobotics.com/showthread.php?t=3383

Adrenalynn
09-05-2009, 03:28 AM
Darn it, all the cool kids are doing it.

Fine. I scrounged around the junk box and dug up some... Junk. What'd you expect from the junk box...

I think I have about everything I need. Except for two SES Large C's and a name.

So, yeah, I'm tossing my hat in the ring with a Quad. As long as his leg doesn't fall off, I can battle Chef Omega for the bronze. ;)

Mech Name: TBD
Division: Airsoft
Status: Mechanical: 5% Control: -16.23%
Legs: SES Brackets
Frame: Scrap

societyofrobots
09-05-2009, 08:31 AM
Mech Name: Raven
Division: Airsoft/possibly hardcore if it happens
Status: 90% designed, 90% electronics done, 85% programmed, 90% constructed
Time Spent: 135+ hours (and counting)
Frame: Custom
Controller: Axon II (http://www.societyofrobots.com/axon2)
Legs: 2-legged dynamic walker, all micro-servos
Build Log: video blog to appear here http://www.youtube.com/societyofrobots


note: The date to RoboGames was unfortunately moved to April and is very much interfering with my travel plans. My chance of coming is now 10%, but I'll build the robot either way.

lnxfergy
09-05-2009, 01:10 PM
And my other mech, the Reaver, a biped, also AX-12s, I'll start a real thread on it when I've the feet/controller/guns/camera attached. But here's a teaser:

-Fergs

http://forums.trossenrobotics.com/gallery/files/1/7/6/8/reaver_926577.jpg

FlowbotX
09-08-2009, 07:09 AM
http://farm4.static.flickr.com/3423/3179096398_8eebb7c591.jpg

#1
Mech: BOo
Status: Mechanical - Built. Still needs guns, target plates, and IP camera upgrade. Software - 70%
Frame: MSR-01 (Modified)
Division: Hexapod

My ability to participate hinges on whether or not I can make it out to California next year. But I'm working on it.

rebel
09-11-2009, 01:52 PM
Mech: Seizure

Status: frame 80%(need tank guns to continue)/Software about 30%(still working)

Frame: Lynx Brackets/Lexan interconnecting parts

Division: Bipod/Airsoft

:p

darrellt
09-16-2009, 05:27 PM
Mech: Miss Alignment
Status: Walking, slowly; Shoots air-soft, Remote Control mode works minimally, Autonomous still in proof-of-concept stage
Frame: Lynx BRAT, mostly copied from tutorial.
Division: Bipod/Airsoft, Hopefully Autonomous using Android cellphone as brain.

Our team consists of two computer programers from Colorado.

Here is a pic of her after our first weekend of work. Keep in mind this is not the finial config, just to meet the proof-that-something-mech-looking-exists requirement.

http://forums.trossenrobotics.com/gallery/files/3/5/3/9/missalignment_birthday_thumb.jpg (http://forums.trossenrobotics.com/gallery/showimage.php?i=1776&c=3)

We will probably end up looking very similar to the BRAT mech in the lynx tutorial, the main difference being in the control system, and our batteries are in the feet.

DresnerRobotics
09-16-2009, 07:03 PM
If you are posting in this thread for roll call, please post a picture or link to your project thread/webpage.

Not trying to pick on anyone here, but we're trying to get an accurate count of participants and while ideas are great, we had a number of people 'building mechs' for Year One who never showed.

I'm going to ask for some sort of proof that you've made decent progress (getting a bot built, walking, and shooting is HUGE progress) before you're added to the roster.

SystemDefect
10-03-2009, 07:19 PM
Mech: TimberWolf
Status: Development
Frame: Custom/Lynxmotion
Division: Biped/Airsoft and possibly hardcore

I will keep you posted on the development of TimberWolf, But a few details will remain Classified. ;)
http://forums.trossenrobotics.com/gallery/files/3/5/8/7/dscn0504.jpg
http://forums.trossenrobotics.com/gallery/showimage.php?i=1832&c=3&userid=3587

Adrenalynn
10-03-2009, 07:26 PM
Welcome to the forum!

That's a lot of weight up there. What's it walking on? Servo type? What are you using for a wireless sender with that video?

SystemDefect
10-04-2009, 10:49 AM
That robot will be dismantled and harvested for the new project. Timberwolf will indeed be a Fatkid but he will be built on a completely new Platform. I'm currently out to sea on board the USS Ronald Reagan. So I'm a little limited untill we get back to home port but being a 2M Tech I have access to everything a Geek could ever want.

xdream
11-06-2009, 03:40 PM
Mech: X-BRAT
Status: Development Frame/Mechanics 80% complete working on autonomous code
Frame: Lynxmotion
Division: Biped/Airsoft

More pics video and infor on X-BRAT can be found here: http://forums.trossenrobotics.com/showthread.php?t=3640

nyditch
11-15-2009, 12:30 PM
The Santa Rosa Jr. College Robotics Club just started a quadruped mech and will hopefully be entering it in the 2010 Mech Wars.

Name: (N/A)
Status: Prototype design and beginning programming.
Frame: Custom
Division: Airsoft
% done: <10%

lumpen5
11-28-2009, 10:52 PM
Mech Information
Mech: Nomous-580
Status: parts ordered 11/30/09
Frame: brat bi-ped Lynxmotion
Division: biped
Armament: airsoft 500g cannons/coilgun?

Since this is my first robot build ever (yes complete robonoob) I realize I am shooting for the stars attempting to create a bi-ped mech (autonomous at that) that will be ready for battle come this April.
I will post my updates on the site http://robonoob.com

The parts are ordered. Research on the boards continues... excitement mounts...

xdream
11-29-2009, 12:29 PM
Welcome Lumpen! It would be awesome to have moure autonomous bots at Mech Warfare!
Xdream

LTGunner
11-29-2009, 07:08 PM
Mech: Gunner’s Daughter
Status: Development/Upgrade Revision 1
Frame: Lynxmotion BRAT Hybrid
Division: Biped
Armament: .12g Airsoft Cannon
Project Status: Baseline Mech built & tested / upgrades required to achieve full functionality (645 Servo Upgrade, switch from SSC-32 to Bot Board w/Basic Atom Pro 28, Power Distribution, etc). Software code refinement & regression testing continues.
Percent Complete: 50&#37;



http://i67.photobucket.com/albums/h299/LTGunner/DSCF3441.jpg

webgeek
11-29-2009, 11:31 PM
Mech: Unnamed Currently
Status: R & D/prototyping
Frame: Custom machining, all made from 6061 aluminum
Division: 4-legged monstrosities, both casual and hardcore
Armament: Two Airsoft guns (gutted Defenders are the current thinking) for both divisions, chemical rockets additionally for hardcore division because they are cool and I've got a lot of rocketry experience so they will be a piece of cake to make. Debating if I want to try mechanical rockets for the non-hardcore division - probably not.
Project Status: I'm currently designing on paper the parts and then machining out components to test the ideas. I'm basically building every part from scratch because I want to go a different direction with the design. It might work, it might not. It's too early for me to be on the roll call but I am very interested in participating and putting a lot of time/money into it right now.
Percent Complete: < 5% though it's still early, lots of time :)

I've attached a prototype of a leg segment. It's tiny because I'm just trying out a joint idea and don't need to waste material to make it larger. I hope to have the whole mechanical idea worked out this week.

Have fun!

-Mike

lnxfergy
12-05-2009, 06:48 PM
I've added XBrat, Gunner's Daughter, Shadowcat, and BOo to our list. Others who aren't on the front page list yet, you will be when you update your post showing an actual mech under construction (that looks like it is either walking/close to walking).

I've also changed the status on several bots to "Tentative" for those who have mechs, but aren't sure they will be ready in time, or aren't sure that they can make it to Robogames.

Just drop me a PM if I need to correct any errors.

-Fergs

lumpen5
12-17-2009, 09:08 PM
Nomous-580 mech update:

Now moving autonomously with guns mounted.
Still need to install gun electronics, remount the guns, upgrade to 645 serovs, upgrade programing to including targeting

I'd say 50&#37; done.

YouTube- nomous-580-mech.wmv

lumpen5
01-07-2010, 07:52 PM
Ok, fully configured (just need to tidy up the wiring) Nomous is wandering around though not autonomously, yet. That is the next step. Now the fun part begins. How to get Nomous to walk and fire like an autonomous mech!

What was done:
upgraded to 645 servos, installed cannon electronics, test fired with live ammo.

Needs to be done:
tidy up wiring (looks super messy right now) continue tweaking servos, continue autonomous programming

The video below is just walking around and dry firing of the cannons for proof that my mech is ready for combat!

Add me to the list of live action mech! W00T!

YouTube- nomous mech with cannons

billyzelsnack
01-14-2010, 10:37 AM
Mech name: Softspot. ( The top of his head has a soft spot because it is only covered by black tape. )

http://www.youtube.com/v/9I0Sw4_Xorg&hl=en_US&fs=1

I'm working towards entering two robot shows this year. Robocup and Mech warfare. Robocup qualification deadline is Jan 22 ( I better hurry ) so I'm focusing on that for the moment, but I have made enough progress now that I might as well show him for Mech warfare.

He's made from 18 AX-12's and comprehensive brackets. Two micro-servos for pan-tilt. A PS3 eye for a camera. A Hylands IMU. An Atom 1.6GHz main cpu ( fit-pc2 ) running Linux. An AVR ( teensy ) for communication between the main cpu and the AX12's/micro-servos.

The main planned modifications for Mech warefare are to replace both arms with cannons or possibly use one arm as a cannon and the other as a pellet feed. Since the robot will have the autonomous capabilities required for Robocup I'd like to enter him for both autonomous and piloted competitions. For piloted competitions I'll broadcast the camera output over wifi ( probably just VLC streamed ) to view and control from my ipod touch.

Also.. If I do manage to qualify for Robocup I'll need to build 3 duplicate robots so I might end up with 3 robots for Mech warfare too!

lnxfergy
01-14-2010, 10:45 AM
Wow, very nice, a Bioloid humanoid carrying an Atom, that can actually walk! You need to post a thread on that bot, with some up close photos, looks awesome!

-Fergs

Nishi
01-14-2010, 12:04 PM
Wow, very nice, a Bioloid humanoid carrying an Atom, that can actually walk!
-Fergs


Indeed, great work!

CTR1
01-17-2010, 03:52 AM
Hey my name is Calvin and I haven't been on in long time like since September which was also the last time i have touched my comprehensive bioloid kit. This is due to me starting college at the University of Washington Seattle campus. Just joined the UW robotics club and volunteered up my robot kit for us to use (if we finish in time) at mech wars. Had to volunteer my kit because there are only 2 other people and UW wont/doesn't give money for parts/kits. And if we don't finish in time then next year but hope to go anyways even if no robot to bring just to see some cool robots in war : ). Any hunches or guesses about when the event is going to happen? Might not be able to go depending on when it is. So just wanted to put the UW robotics club up here and maybe cya later this year at mech wars.

sthmck
01-17-2010, 07:24 AM
Do you mean the dates for Robogames? If so it is April 23-25. I am going to end up skipping a day of classes in order to make it, but unless you have exam reveiws it is worth it. How much department support do you have for your club? You may be able to get excused from classes.

CTR1
01-18-2010, 03:25 AM
Oh so the event is happening quite soon then...hmm yeah hopefully I wont have to skip a day of classes but wont know until the end of the current quarter/beginning of next quarter when i know my new schedule. Also depends if I can get money to get down there and stay somewhere but we will see, first need to build, program and complete a robot. Uhh we have no support whatsoever unfortunately but I have emailed several companies inquiring if they could sponsor our club or not but haven't gotten any replies yet.

lumpen5
01-28-2010, 12:52 PM
Ok the latest update from the Nomous Team:

Live fire drill (joystick controlled)

Enjoy


YouTube- live fire mech.wmv

Nishi
01-29-2010, 10:46 AM
Here's My Fully Autonomous entry into Mech warfare 2010. I'd say it's about 85&#37; ready.

I'm running those 422's ya know.... no expense spared.

http://www.youtube.com/watch?v=ZyYhUCQpDSQ

NO I'm Joking! ;)

But great work Lumpen5 looking good.

and darrellt I really like miss alignments intuitive use of an android phone as a brain, its come such long way aswell.

I really like all the Entries, some of my favorites are Clyde (http://forums.trossenrobotics.com/blog.php?b=196) by Mannyr7, Squidword (http://forums.trossenrobotics.com/showthread.php?t=3100) by Darkback2 and XBrat (http://forums.trossenrobotics.com/showthread.php?t=3640) by xdream and ShadowCat (http://forums.trossenrobotics.com/showthread.php?t=3695) by Rebel, SES biped.

Looks like this year we really will see footage of bipeds battling it out.

tuzzer
03-19-2010, 01:09 AM
Mech's name: RoboLoo
Status: still in the progress of machining some parts and coding the steps

I don't really have any meaningful pictures to post right now but here's a brief description about the structure of this robot:

Microcontroller: one dsPIC33F
Legs: modified Lynxmotion BRAT
Weapon: single toy tank air soft gun
Battery: A123 6.6V battery
Camera: Trendnet IP camera
Wireless: UART through XBee
Control: Laptop through serial connection
It has pan-and-tilt for pointing the gun and camera. All the circuit are wired on perforated breadboards.

We are a team of about 10 people. We started this when we were in first year second semester and now we are in second year first semester (Waterloo has weird co-op system). This is more or less our first mech, though some of us did some highschool robotics competition.

Due to low budgets, we have really been hecking things (such as our sketchy board and connector cables). It's still in the progress and the walking haven't really been tested with everything on yet. But we will make it work! :veryhappy:

tuzzer
03-19-2010, 02:07 AM
Oh so the event is happening quite soon then...hmm yeah hopefully I wont have to skip a day of classes but wont know until the end of the current quarter/beginning of next quarter when i know my new schedule. Also depends if I can get money to get down there and stay somewhere but we will see, first need to build, program and complete a robot. Uhh we have no support whatsoever unfortunately but I have emailed several companies inquiring if they could sponsor our club or not but haven't gotten any replies yet.


We are from UW too! But it's University of Waterloo! (bad joke, I know..)
Anyways, what year are you in? And yes, you have no idea how many classes I missed to build that (machine shop is often full in after-class time)! xD

Do you guys have like a school endowment fund? We basically got about $2000 from there and that's all we have. We asked companies for money too, but never got anything yet (or we just didn't try hard enough). But actually the flight from Waterloo to San Francisco would take up most of the budget.....

mannyr7
03-23-2010, 01:45 AM
Well CLYDE is dead. He's been sitting in a couple boxes since last summer. After much re-engineering, programming, mcu change, etc...Something else completely different emerged. I now present you .... WARCHILD!

http://lh5.ggpht.com/_RBehtyGR3tY/S6hhAh_mwHI/AAAAAAAAA4c/T8bFrvAkMLI/s800/photo%20%281%29.jpg

http://lh4.ggpht.com/_RBehtyGR3tY/S6hhBo25cKI/AAAAAAAAA4g/wugMP9BklMU/s800/photo.jpg

See ya next month!

tuzzer
04-10-2010, 11:05 PM
Most of the main part is completed. Still need to attach the XBee, add some protective casing and add the ammo feeder.
Also, still working on the software...


I really don't get how others can make theirs so small. We have many boards and a giant battery. Perhaps it's because we made everything on perforated boards and DIP components.