Selecting PhidgetInterfaceKit 0/16/16 USB to 16 digital in/out ports
Posted 03-05-2009 at 12:32 PM by kgw
I went with:
The PhidgetInterfaceKit 0/16/16 provides:
For MomPC -- this is a very good choice -- can drive the solenoids directly -- and also have digital inputs which is very cool -- I plan to install a motion detector -- to monitor when someone comes into her room -- this will allow me to know if she has not been turned for more than 2 hours -- as well as give a light detect acknowledgement of when the cell phone is active -- as well as others..
Thanks again.
btw: I found another very similar device USB digital output interface -- $10 higher cost -- but no inputs -- but slightly higher driver 9amps at 12VDC.
http://www.bibaja.com/cart/index.php...products_id=15
Kevin
The PhidgetInterfaceKit 0/16/16 provides:
- 16 Digital Inputs sensing up to 30VDC
- 16 Digital Outputs controlling up to 30VDC
- LED indicators on all I/O channels
For MomPC -- this is a very good choice -- can drive the solenoids directly -- and also have digital inputs which is very cool -- I plan to install a motion detector -- to monitor when someone comes into her room -- this will allow me to know if she has not been turned for more than 2 hours -- as well as give a light detect acknowledgement of when the cell phone is active -- as well as others..
Thanks again.
btw: I found another very similar device USB digital output interface -- $10 higher cost -- but no inputs -- but slightly higher driver 9amps at 12VDC.
http://www.bibaja.com/cart/index.php...products_id=15
Kevin
Total Comments 0
Comments
Total Trackbacks 0
