New to the site/hobby, hope I'm putting this in the right place. I've tried to do all my research and will put as much pertinent info in here to help
We just rolled out the newest version of the PhantomX AX Hexapod, and it is a force to be reckoned with. With a full metal frame, high capacity
For the fun of it and to do some experimentation, I put together a new Teensy board, that is the same size and has the same hole pattern as the Arbotix-Pro.
So, I've been working on PRS stuff again and finally to a place where it might be worth sharing and also so I do not forget ...again. The PRS (and maybe
Its been around 10 years since I purchased my Robonova-1, after playing around with it for while before a house purchase took over all my spare time.
The upcoming Robogames kicked me in the butt enough to dust off my Onyx X plans.
You may recall, I was too busy with the robomagellan last year,
Given that you can get a USB 8051 chip for about $0.50, and a microUSB connection for about as much more, I'm wondering whether custom boards shouldn't
- Did you remove the Xbee before loading the sketch?
- What is the error you are seeing?
Not sure what to suggest to help. As not sure what all the options were that you tried. Also no pictures, so can not tell if wiring and jumpers look
My name is Anbu Kumar, I am from Bangalore / India, I recently bought Phantom Hexapod MK-3. I am getting the same error while loading
Its really beautiful kit, I bought this few weeks back, assembled it completely but my bad luck none of the programs are loading. Even a simple "Blink"
Another quick update:
Yesterday I finally plugged the RPI hat onto the RPI3 board and no blue smoke
the 5Amp Polou DC/DC
Just going to leave this here in case anyone else ever needs to turn a small PCB into a V-cut array. Would have made panelizing the quadnought power board
You're writing all that, and we don't get to see a picture? That counts as teasing :-)
It sounds like you're making progress, and by all means,
Mostly this hobby is tons of fun. Sometimes it's not...