Trossen Robotics Community

Newest Robot Projects - Click For More
- Project Name: Tachikoma Project by TheMaverick
  
  Author: TheMaverick
  
  Synopsis: Tachikoma 4 leged Robot from Ghost in the Shell SAC Season 1
- Project Name: Shotbot Shot Bot
  
  Author:
  
  Synopsis: The Shot Bot pours a perfect shot from two liquor sources
- Project Name: Percival
  
  Author: kautza
  
  Synopsis: My first legged robot. It has 5 degrees of freedom per leg.
- Project Name: Dark-Matter-SIX
  
  Author: SuperDave42
  
  Synopsis: A super cool and awe inspiring modified PhantomX that will be trained to do 3D mapping (as soon
Newest Community Videos - Click For More
Newest Images - Click For More
- Sling v4
  by lutinplunder
- Sling 20190106
  by lutinplunder
- MatLab 20190101
  by lutinplunder
- Octopod Render
  by lutinplunder
- AFRLCC HAVOC
  by lutinplunder
- Money Pit V
  by jwatte
- Money Pit V
  by jwatte
- Crunch II
  by jwatte
domiinio

There is no available content written by domiinio
Recent Threads
The Raspberry pi 4 Model B
Thread Starter: LloydF
Well I have 2 of the new rpi4's with 4GB of Memory on pre-order. This will be nice.

Raspberry Pi 4 specs
SoC: Broadcom BCM2711B0
Last Post By: drachels 8 Hours Ago
Planning to build HR-OS1 robot using AX-12A & AX-18A (looking for frames)
Thread Starter: kshin
Hi, I am considering taking AX-12A's from my PhantomX/Hexapod to build a HR-OS1. I also have a handful of AX-18A, so I would probably use it as well.
Last Post By: drachels 8 Hours Ago

More Mule then Rover?
Thread Starter: Tommy_T
Hello Forum, This is a first post and as it turns out a first personal project for me.

My First Project: General Lawn care Mule.

Last Post By: Tommy_T 16 Hours Ago

The task (lawn mower topic)
Thread Starter: Tommy_T
The task

Automatically mow a field 100ft x 1000ft.

Task started: 4/2018
Task Completed:

Last Post By: Tommy_T 16 Hours Ago

PhantomX Hexapod MK-IVS
Thread Starter: LloydF
I have my new Hexapod on the charger. Ran updates and noticed hum I do not know the password for this robot.
This robot needs a few links to the
Last Post By: LloydF 4 Days Ago

The Robotis TurtleBot3
Thread Starter: Gort
The Turtlebot3 looks sweet! It is controlled with a Raspberry Pi and OPENCR. It also comes with a 360 LIDAR sensor and it is a open sourced robot! I should
Last Post By: LloydF 5 Days Ago

Trossen Robotics Blog RSS

Junkbot Competition Winners!

Junkbot Competition Deadline Extension! (now October 26)

Super Mysterious Robotics Grab Bag and Junkbot Competition!

New Kits, Microcontrollers, and Sensors from DFRobot!

Reactor Arm Smiley!
Recent Forum Posts

Re: The Raspberry pi 4 Model B

Have you tried to get the HROS1-Framework to compile on your Pi4 yet? I've been trying to for the past few days, but not able to get all the deprecated
drachels 8 Hours Ago

Re: Planning to build HR-OS1 robot using AX-12A & AX-18A (looking for frames)

Hi kshin,
Have you made any progress with this? I have just recently started working again on my HR-SO1 (Joe). Joe is working fine with the original
drachels 8 Hours Ago

Re: More Mule then Rover?

With all the failures I've encountered with the mowing deck it should not surprise me that
I failed to get a warm & fuzzy feeling with the gas
Tommy_T 16 Hours Ago

Re: The task (lawn mower topic)

danniel, yes the internal fan type alternator did run much cooler then the external fan type.

With the external fan type alternator I would
Tommy_T 16 Hours Ago

Re: PhantomX Hexapod MK-IVS

Rick to the rescue.
Naturally it is interbotix. Only word I did not try, although i did not think "dam robot" was going to
LloydF 4 Days Ago

PhantomX Hexapod MK-IVS

I have my new Hexapod on the charger. Ran updates and noticed hum I do not know the password for this robot.
This robot needs a few links to the
LloydF 4 Days Ago

Re: The Robotis TurtleBot3

Hum. Well I did find ROS Robotics Projects (second edition). It seem to be up to date. YEA!
LloydF 5 Days Ago

domiinio

Recent Threads

Raspberry Pi 4 specs

Recent Forum Posts