Page 1 of 2 12 LastLast
Results 1 to 10 of 13

Thread: Tyb's Spring Cleaning Sale!

  1. #1
    Join Date
    Dec 2007
    Location
    Portland, OR
    Posts
    3,198
    Images
    952
    Rep Power
    139

    Tyb's Spring Cleaning Sale!

    First up, SES + Hitec Servo Grab Bag!

    Here's what is included:

    17x HS-5645MG Servos
    4x HS-645MG
    3x HS-475HB
    2x HS-75BB
    2x HSR-1422CR
    1x HS-225BB Micro
    1x HS-81 Micro
    1x HS-85BB Micro
    1x Futaba S3004
    1x HS-422
    1x HSR-8498 Robonova Servo
    1x Parallax CR Servo
    1x HS-322 Servo
    Pile-O-Servo Erector Set
    2 grippers with unknown servos installed
    1 LittleGripper
    Random Sharp IR Sensor
    Phidget 4-servo controller
    Way too many overpriced aluminum servo horns

    All servos are as-is. They're all lightly used, I've tested them all out at some point and I know for sure the more expensive ones are in fine working condition. I'm mostly pricing this for the 5645s and 645s, so if those are DOA I'll replace em, the rest of it comes as-is. One thing! The 5645s are by and large missing the servo horn screw- these are pretty common/cheap and can be picked up from mcmaster carr or a local hobby store.

    Asking price- $500 USD + $15 flat rate shipping anywhere in the continental US. -Sold!

    I would prefer to keep this as one big grab bag, it's a pretty solid deal with all you're getting. That said, if you absolutely must, feel free to tempt me to break it up.

    More to come shortly! If you have questions, please PM or feel free to ask here! If you'd like to buy, please PM! Paypal is the preferred method of payment!
    Last edited by DresnerRobotics; 08-19-2010 at 05:12 PM.

  2. #2
    Join Date
    Dec 2007
    Location
    Portland, OR
    Posts
    3,198
    Images
    952
    Rep Power
    139

    Re: Tyb's Spring Cleaning Sale!

    Next up! A semi-completed BRAT Mech! I wish I had time to put the finishing touches on this, alas I have far too much going on. He needs a home!

    Included:

    A HS-645 (6 total) based BRAT, in black.
    Pan/tilt Assembly cleverly added, using HS-422.
    Basic Atom Pro/Bot Board 2
    Wireless PS2 controller/receiver
    Airlink Wifi Camera
    Random other SES based mech torso with HS-645MG & HS-322 pan/tilt

    He needs TLC! Great way to start off a BRAT based Mech. -Sold!

    Yours for only $220! Shipping is $10 flatrate within continental US.
    Last edited by DresnerRobotics; 08-19-2010 at 05:12 PM.

  3. #3
    Join Date
    Dec 2007
    Location
    Portland, OR
    Posts
    3,198
    Images
    952
    Rep Power
    139

    Re: Tyb's Spring Cleaning Sale!

    Next up! Roboard Starter Kit!

    http://www.trossenrobotics.com/roboard.aspx

    This is practically brand new, I've fired it up once to do some testing.

    Included:

    Roboard RB-100
    Roboard Cable Set
    Roboard VGA Card + Cable

    Not included; USB break-out cables. If you need em, I can dig for them, otherwise find them at your local PC store.

    Asking Price, $160 USD + $5 flatrate shipping within Continental US.
    Last edited by DresnerRobotics; 07-23-2010 at 10:34 AM.

  4. #4
    Join Date
    Dec 2007
    Location
    Portland, OR
    Posts
    3,198
    Images
    952
    Rep Power
    139

    Re: Tyb's Spring Cleaning Sale!

    Next up, Wifi Video IP Encoder!

    What is it? Basically, you give it audio and video in standard NTSC format (meaning, plug in the BNC or RCA surveillance camera of your choice and go!) and turns it into an IP addressable location. In short, it turns the small, high res cameras you find everywhere into Wifi cameras. The board itself is fully featured, runs an embedded linux OS and has a webserver interface. SD Cards can be inserted for local recording or timelapse. This is a higher performing setup than something like the Trendnet IP-110w, but is a bit larger.

    This came to me in a gigantic, heavy, steel case and cost about $350 when I purchased it from Super Circuits roughly 2 years ago. It works fine, guaranteed against DOA, but due to my modifications I highly doubt it has any warranty to speak of.

    Asking Price, $100! I'll also throw in a nice 480p camera, sans interface cables. for free. $5 flatrate shipping anywhere in the continental US.
    Last edited by DresnerRobotics; 07-23-2010 at 10:35 AM.

  5. #5
    Join Date
    Dec 2007
    Location
    Portland, OR
    Posts
    3,198
    Images
    952
    Rep Power
    139

    Re: Tyb's Spring Cleaning Sale!

    Next, a Good ol' SSC-32.

    Lightly used, always loved.

    Asking price: $24 USD + $5 flaterate shipping anywhere in the continental US. SOLD!
    Last edited by DresnerRobotics; 07-20-2010 at 05:25 PM.

  6. #6
    Join Date
    Dec 2007
    Location
    Portland, OR
    Posts
    3,198
    Images
    952
    Rep Power
    139

    Re: Tyb's Spring Cleaning Sale!

    Basic Atom Pro + Bot Board 2

    Lightly Used, Fine working condition.

    Asking price, $45 USD + $5 flatrate shipping anywhere to the continental US.
    Last edited by DresnerRobotics; 07-23-2010 at 10:36 AM.

  7. #7
    Join Date
    Dec 2007
    Location
    Portland, OR
    Posts
    3,198
    Images
    952
    Rep Power
    139

    Re: Tyb's Spring Cleaning Sale!

    p.Brain-µ24-HexEngine! What is it? Basically the older version of this:

    http://www.hexapodrobot.com/store/pr...products_id=72

    I picked one of these up in a trade like a year ago and never ended up putting it to use. It's essentially brand new, the previous owner only fired it up once. It's a ready to go hexapod IK controller, more documentation on it is available on the MicroMagic Systems website!

    Sold!
    Last edited by DresnerRobotics; 07-23-2010 at 10:17 PM.

  8. #8
    Join Date
    Dec 2007
    Location
    Portland, OR
    Posts
    3,198
    Images
    952
    Rep Power
    139

    Re: Tyb's Spring Cleaning Sale!

    HUV Robotics Bioloid IO Board

    http://www.trossenrobotics.com/p/bioloid-io-board.aspx

    I have two of these for sale!

    Asking price is $40 each, Shipping is $5 flatrate within continental US.

  9. #9
    Join Date
    Dec 2007
    Location
    Portland, OR
    Posts
    3,198
    Images
    952
    Rep Power
    139

    Re: Tyb's Spring Cleaning Sale!

    Bioloid Foot Pressure Sensor Board Kit, gently used.

    I have 2 of these!

    http://www.trossenrobotics.com/p/Bio...sor-Board.aspx

    Asking price is $45 USD each, Shipping is $5 flatrate within continental US.
    Last edited by DresnerRobotics; 07-23-2010 at 10:36 AM.

  10. #10
    Join Date
    Dec 2007
    Location
    Portland, OR
    Posts
    3,198
    Images
    952
    Rep Power
    139

    Re: Tyb's Spring Cleaning Sale!

    Bioloid USB Bus Board!

    http://www.trossenrobotics.com/p/Bio...Bus-Board.aspx

    Asking price $35 USD, Shipping is $5 flatrate within continental US.

    More on the next page of this thread!
    Last edited by DresnerRobotics; 07-23-2010 at 10:37 AM.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Spring Cleaning: Tri-Track, Arduino, Sensors
    By lnxfergy in forum Garage Sale
    Replies: 7
    Last Post: 07-23-2010, 07:55 PM
  2. News/Announcement Summer '09 Fire Sale!
    By DresnerRobotics in forum Robotics General Discussion
    Replies: 6
    Last Post: 08-04-2009, 11:12 PM
  3. asimo for sale
    By openmindedjjj in forum Robotics General Discussion
    Replies: 7
    Last Post: 07-19-2008, 05:17 PM
  4. Spring Chibotica 2008 - April 20 2008
    By srobot in forum Robotics General Discussion
    Replies: 3
    Last Post: 02-06-2008, 01:19 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •