I have modified and expanded lnxfergy's original AX12 python script to run on a Raspberry Pi. It presents a wrapper for communicating with an AX12 servo that can be imported into a script. The module also provides a few rudimentary functions from a command line such as creating and playing poses. The module assumes that the AX12 servo(s) are connected through a buffer such as a 74HC125. The direction is controlled by a GPIO pin. We might could eliminate this by closing the serial port, tristating the pin, and then reopening the port. It doesn't seem to be worth the work involved though.

Here is the new library:

Here's a link to lnfergy's original tutorial:

"If A is a success in life, then A equals x plus y plus z. Work is x; y is play; and z is keeping your mouth shut."

Don't be a HelpVampire