Page 11 of 31 FirstFirst ... 78910111213141521 ... LastLast
Results 101 to 110 of 302

Thread: PhantomX using a Teensy 3.1

  1. #101

    Re: PhantomX using a Teensy 3.1

    You are welcome. Now I just hope they work

  2. #102
    Join Date
    Jan 2008
    Location
    Norway, Stavanger
    Posts
    786
    Images
    276
    Rep Power
    72

    Re: PhantomX using a Teensy 3.1

    Hopefully they will. Did you see my question about the resistors?
    Kåre Halvorsen aka Zenta
    ---------------------------------
    Zenta's YouTube channel
    Zenta's Blog
    Zenta's Instagram

  3. #103

    Re: PhantomX using a Teensy 3.1

    Quote Originally Posted by Zenta View Post
    Thanks for sharing Kurt!

    A question; what's the R11 and R12? NC value? Looking at your schematic they are simple pull-up for A4 and A5. Is there a reason for no value or are they optional?
    Oops sorry, I missed this one. Yep these are optional PU resistors for I2C. Was not sure what you might need or not, so I don't install them by default. Also was not sure if there are internal ones I can enable and if so would they be sufficient...

  4. #104
    Join Date
    Jan 2008
    Location
    Norway, Stavanger
    Posts
    786
    Images
    276
    Rep Power
    72

    Re: PhantomX using a Teensy 3.1

    Ok, I see. No problem then. Thanks.
    Btw. Did you find a solution for fixing the PhantomX bodyplate or are you waiting for a new?
    Kåre Halvorsen aka Zenta
    ---------------------------------
    Zenta's YouTube channel
    Zenta's Blog
    Zenta's Instagram

  5. Re: PhantomX using a Teensy 3.1

    Quote Originally Posted by Zenta View Post
    Just ordered one batch of 3 boards and 3 Teensy3.1 all purple form OSH park. It was a bit strange that I couldn't order both the Teensy board and the PCB board on the same order. X-ing fingers for free shipment of the boards to Norway, lol. Next step is to order parts from DigiKey.
    I wouldn't hold your breath waiting for the boards from OSH Park. They are apparently really good for people living in the US. I live in Canada, and it took 5 weeks to get the boards I ordered from them. The shipping took just over 3 weeks of that total time. The manufacturing took 2 weeks because I ordered them over Christmas.

    - Jon
    "The best way to predict the future is to invent it." - Alan Kay, inventor of Smalltalk

  6. #106
    Join Date
    Jan 2008
    Location
    Norway, Stavanger
    Posts
    786
    Images
    276
    Rep Power
    72

    Re: PhantomX using a Teensy 3.1

    Thanks for the heads up Jon. I'm in no hurry though, if I get the boards late next month I'm hopefully done with the MorpHex MKII and ready for some new projects using the Teensy. Next time I'll probably test the SeedStudio too.
    Kåre Halvorsen aka Zenta
    ---------------------------------
    Zenta's YouTube channel
    Zenta's Blog
    Zenta's Instagram

  7. #107

    Re: PhantomX using a Teensy 3.1

    Quote Originally Posted by JonHylands View Post
    I wouldn't hold your breath waiting for the boards from OSH Park. They are apparently really good for people living in the US. I live in Canada, and it took 5 weeks to get the boards I ordered from them. The shipping took just over 3 weeks of that total time. The manufacturing took 2 weeks because I ordered them over Christmas.
    I was curious about the timings for the two of them, so I ordered from both. The OSH Park ones which I ordered about a day earlier arrived here about 3 days before the ones from Seeedstudio. But for me shipping is quick from OSHPark as I only live one state away...

  8. #108

    Re: PhantomX using a Teensy 3.1

    Forgot to mention, I now have my Teensy version of the Phantom Phoenix at least stumbling along on the Quad. Have not put it on the ground yet to see how well...

    Body parts for Hex were shipped yesterday, so they should arrive next week. It is actually sort of interesting that shipping parts from China to Washington State takes only a few days longer than it does from Illinois. Not sure why, but ordered an Open CM9... so may have more stuff to figure out what to do with.

  9. #109
    Join Date
    Dec 2012
    Location
    Los Angeles, CA
    Posts
    831
    Images
    25
    Rep Power
    80

    Re: PhantomX using a Teensy 3.1

    Quote Originally Posted by KurtEck View Post
    Not sure why, but ordered an Open CM9... so may have more stuff to figure out what to do with.
    I can't say I'm shocked by this statement....

  10. #110
    Join Date
    Jan 2008
    Location
    Norway, Stavanger
    Posts
    786
    Images
    276
    Rep Power
    72

    Re: PhantomX using a Teensy 3.1

    Quote Originally Posted by KurtEck View Post
    Forgot to mention, I now have my Teensy version of the Phantom Phoenix at least stumbling along on the Quad. Have not put it on the ground yet to see how well...
    That's good news!

    Quote Originally Posted by KurtEck View Post
    Body parts for Hex were shipped yesterday, so they should arrive next week. It is actually sort of interesting that shipping parts from China to Washington State takes only a few days longer than it does from Illinois.
    Due to the warnings from Jon yesterday, I've just ordered a batch of boards from SeedStudio. Pretty cheap, 30,75$ for 5 green boards to Norway.

    Quote Originally Posted by KurtEck View Post
    Not sure why, but ordered an Open CM9... so may have more stuff to figure out what to do with.
    LOL, I had a feeling you would try that too..
    Kåre Halvorsen aka Zenta
    ---------------------------------
    Zenta's YouTube channel
    Zenta's Blog
    Zenta's Instagram

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. PhantomX Hexapod Kit
    By SuperMiguel in forum Projects For Request and/or Sale
    Replies: 12
    Last Post: 12-29-2013, 10:36 PM
  2. Question(s) PhantomX AX Quadruped Mark II PhantomX Robot Turret Equipped??
    By hwan we in forum Robotics General Discussion
    Replies: 1
    Last Post: 03-11-2013, 03:09 PM
  3. Question(s) PhantomX Drawings?
    By phil0stine in forum Humanoids, Walkers & Crawlers
    Replies: 2
    Last Post: 01-03-2013, 03:09 PM
  4. For learning: PhantomX Hexapod vs PhantomX Quadruped
    By Leugim in forum Humanoids, Walkers & Crawlers
    Replies: 4
    Last Post: 10-26-2012, 09:50 AM
  5. My PhantomX Hexapod
    By Gilrock in forum Humanoids, Walkers & Crawlers
    Replies: 0
    Last Post: 09-26-2012, 03:23 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •